Wireless Access

Reply
Occasional Contributor II
Posts: 15
Registered: ‎06-09-2016

40 Mhz on ArubaOS 8 and ap-105

[ Edited ]

Hi All,

 

I'm running an ArubaOS 8 testsetup consisting of

1 Mobility Master 8.0.1.0

1 VMC 8.0.1.0

1 AP-105

 

I've got connectivity but I'm unable to make the ap use channel-bonding. I've done all the config at the /md node. I've attacted the config. AP is provisioned in ap-group Diekgait:

 

(DL-ArubaMM-02) [md] #show ap database

AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
AP01 Diekgait 105 192.168.1.8 Up 4h:15m:25s 2 192.168.1.201 0.0.0.0

 

But it does not select a bonded channel:

 

(DL-ArubaVMC-01) #show ap bss-table

fm (forward mode): T-Tunnel, S-Split, D-Decrypt Tunnel, B-Bridge (s-standard, p-persistent, b-backup, a-always), n-anyspot

cluster (cluster role): U-UAC, A-AAC, sU-Standby UAC, sA-Standby AAC

Aruba AP BSS Table
------------------
bss ess port ip phy type ch/EIRP/max-EIRP cur-cl ap name in-t(s) tot-t mtu acl-state acl fm cluster datazone
--- --- ---- -- --- ---- ---------------- ------ ------- ------- ----- --- --------- --- -- ------- --------
24:de:c6:af:33:a0 Diekgait.nl N/A 192.168.1.8 g-HT ap 1/19/19 0 AP01 0 4h:16m:39s 1500 - 68 T no
24:de:c6:af:33:a8 Diekgait.nl N/A 192.168.1.8 a-HT ap 116/24/24 4 AP01 0 4h:16m:39s 1500 - 68 T no

 

Any idea?

Dennis Lansink • Security Engineer
Securelink Nederland
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: 40 Mhz on ArubaOS 8 and ap-105

The AP-105 doesn’t 80MHz channels , it is an 802.11n AP

You need an 802.11ac AP 2xx or 3xx
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: 40 Mhz on ArubaOS 8 and ap-105

[ Edited ]

The AP-105 doesn’t support 80MHz channels , it is an 802.11n AP

You need an 802.11ac AP 2xx or 3xx

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 15
Registered: ‎06-09-2016

Re: 40 Mhz on ArubaOS 8 and ap-105

I'm not asking for 80 mhz, but for 40 mhz. Right now it will only do 20 mhz.

Dennis Lansink • Security Engineer
Securelink Nederland
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: 40 Mhz on ArubaOS 8 and ap-105

Here you go:
http://www.arubanetworks.com/pdf/technology/whitepapers/requirementsfor80211ac.pdf
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: 40 Mhz on ArubaOS 8 and ap-105

Here you go:
http://www.arubanetworks.com/pdf/technology/whitepapers/requirementsfor80211ac.pdf
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: 40 Mhz on ArubaOS 8 and ap-105

Sorry misread your original request

Can you validate that the 802.11a radio profile has wide-channels enabled

Also under the SSID > HT SSID profile the 40 MHz and HT is enabled

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 4,269
Registered: ‎07-20-2011

Re: 40 Mhz on ArubaOS 8 and ap-105

Sorry misread your original request

Can you validate that the 802.11a radio profile has wide-channels enabled

Also under the SSID > HT SSID profile the 40 MHz and HT is enabled

Get Outlook for iOS
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 15
Registered: ‎06-09-2016

Re: 40 Mhz on ArubaOS 8 and ap-105

See here:

 

rf dot11a-radio-profile dot11a-dl
csa
dot11h
arm-profile arm-dot11a-dl
max-channel-bandwidth 40MHz
eirp-max 127
!
wlan ht-ssid-profile ht-ssid-dl-test
!
wlan ssid-profile ssid-dl-test
essid Diekgait.nl
opmode wpa2-psk-aes
dtim-period 5
a-basic-rates 12 24
a-tx-rates 12 18 24 36 48 54
g-basic-rates 18 24
g-tx-rates 12 18 24 36 48 54
max-retries 4
max-clients 128
wmm
wmm-vo-dscp 46
wmm-vi-dscp 26
wmm-be-dscp 0
wmm-bk-dscp 8
local-probe-req-thresh 10
wpa-passphrase *****
max-tx-fail 25
ht-ssid-profile ht-ssid-dl-test
g-beacon-rate 18
a-beacon-rate 12
qbss-load-enable
!

 

 

If you want so see more I have attaced the config in the first post.

Dennis Lansink • Security Engineer
Securelink Nederland
Search Airheads
Showing results for 
Search instead for 
Did you mean: