Wireless Access

Reply
Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

650 Controller with AP 105's

How do I know my AP groups/AP's are utilizing full N?

Guru Elite
Posts: 21,491
Registered: ‎03-29-2007

Re: 650 Controller with AP 105's

[ Edited ]

Try "show ap active" to see the APs.  Try "show ap bss-table" to see each individual AP and whether the SSID is broadcasting 802.11n" (HT).

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

Re: 650 Controller with AP 105's

so based on the AP type/model, it will fully utilize N or is there a setting somewhere on the controller to tell it to use N?

Guru Elite
Posts: 21,491
Registered: ‎03-29-2007

Re: 650 Controller with AP 105's

If you create a WLAN with the Wizard, it will ask you.  By default, if you upgrade and install 802.11n APs into your environment, it will be on.

 

FYI - 802.11n will ONLY work with SSIDs that are "Open" or have "AES"

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

Re: 650 Controller with AP 105's

I create via CLI not wizard.  we run WPA-TKIP & WPA2-AES

Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

Re: 650 Controller with AP 105's

bss                ess     s/p  ip           phy   type  ch/EIRP/max-EIRP  cur-cl  ap name   in-t(s)  tot-t            mtu   acl-state  acl  fm
---                ---     ---  --           ---   ----  ----------------  ------  -------   -------  -----            ---   ---------  ---  --

00:1a:1e:15:2b:14  ttrf02  1/0  xx.xx.xx.xx  a-HT  ap    36+/21/21         0       TTap03S1  0        31d:20h:43m:39s  1500  -          28   T

 

I am assuming the a-HT means N?

Aruba Employee
Posts: 571
Registered: ‎04-17-2009

Re: 650 Controller with AP 105's


RR8 wrote:

bss                ess     s/p  ip           phy   type  ch/EIRP/max-EIRP  cur-cl  ap name   in-t(s)  tot-t            mtu   acl-state  acl  fm
---                ---     ---  --           ---   ----  ----------------  ------  -------   -------  -----            ---   ---------  ---  --

00:1a:1e:15:2b:14  ttrf02  1/0  xx.xx.xx.xx  a-HT  ap    36+/21/21         0       TTap03S1  0        31d:20h:43m:39s  1500  -          28   T

 

I am assuming the a-HT means N?


Yes. HT = n.

Thanks,

Zach Jennings
Frequent Contributor I
Posts: 271
Registered: ‎09-24-2010

Re: 650 Controller with AP 105's

thanks!

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: