Wireless Access

Reply

7030 Factory Reset from boot menu

hi all,

how can i  reset the 7030 controlleur from the boot menu .

the issue that i got is : when the controller start it can't read the "default.cfg" file.

i found this post but it was not very useful

 

http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/7210-factory-reset/td-p/113065

 

 

best regards

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]

Re: 7030 Factory Reset from boot menu

for reference

 

1) boot the controller

2)wait for the first stage of the boot process  to complete (cpxload)

3) interrupt the second stage by pressing enter when prompted

4) enter  format 0:2

5) wait a very long time for this to complete.

6) reload the controller and preboot checks will rewrite data to the config partition allowing you to start the config wizard from CLI

 

 

it works with 72xx and 70xx controllers serie

 

thank you scottdoorey

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
New Contributor

Re: 7030 Factory Reset from boot menu

This was helpful also ArubaOS 8.x -version.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: