Wireless Access

Reply
3vi
Occasional Contributor I

7030 ap install

On a 7030 I want deploy new ap managed by the mobility ciontroller. I set the dhcp server on the controller with 43 parameter, where the ip of controller is indicated. It doesn't work. The Ap take the ip address and the controller ip but after it elects him self as a master controller. The controller and the ap are on the same subnet and between them there is connection. If I use the web gui of the ap and go in Maintanance-Convert and I choose Campus Ap managed by a mobility controller and type the ip of controller, the ap reeboot and after connect to controller and works.

What's wrong?  I think the dhcp doesn't give the right ip o configuration

 

Thanks

 

Guru Elite

Re: 7030 ap install

An Instant AP needs to be converted before it can work with a controller.  Option 43 will not work before it is converted


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: