Wireless Access

Reply
Regular Contributor II
Posts: 240
Registered: ‎09-11-2013

7030 controller license question

Hello everyone,

 

I have a 7030-US controller, (by mistake) I purchased a 16 APs license with and 24access points-I should have bough more license-

I connected 16 APs initially to the controller and they work fine, later I adder the other 8 APs to the controller and the also worked fine!!

I was surprised to see that the controller is handling more APs that the license limits!! After that I added two more APs but the would show up as not licensed when I run the show ap database command.

Can someone explain to me how is that kind of licensing situation is being processed please?

 

Thanks,

Guru Elite
Posts: 8,460
Registered: ‎09-08-2010

Re: 7030 controller license question

What version of code?

 

Is this an independent master controller?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Regular Contributor II
Posts: 240
Registered: ‎09-11-2013

Re: 7030 controller license question

Running 6.4

 

I have a master-local setup. Master is the licensing server on centralized licensing.

 

thanks,

Guru Elite
Posts: 8,460
Registered: ‎09-08-2010

Re: 7030 controller license question

So it is likely pulling the licenses from your other controller.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Regular Contributor II
Posts: 240
Registered: ‎09-11-2013

Re: 7030 controller license question

Not sure why, I have no license on the other one. The show license output has nothing on the local controller.

Guru Elite
Posts: 8,460
Registered: ‎09-08-2010

Re: 7030 controller license question

Can you post the output of:

 

show license aggregate

 

 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
MVP
Posts: 331
Registered: ‎04-25-2013

Re: 7030 controller license question

[ Edited ]

Where all APs connected to one controller? if not that may be due to an error caused by centralized license configuration , because in Centralized license server configuration , the client can save his license configuration for a month after a disconnection , so maybe caused by that.

But any why normally you should bay more licenses.

Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Regular Contributor II
Posts: 240
Registered: ‎09-11-2013

Re: 7030 controller license question

Aggregate License Table

-----------------------

Hostname              IP Address  AP   PEF  RF Protect  xSec   Module  ACR  Last update (secs. ago)

--------                    ----------            ---    ---    ----------  -----------    ---       -----------------------

sfc01-awr02           10.0.0.11      0      0      0                 0            0         9

sfc01-awr01         10.0.0.10       16    26   26                 0            0         29

 

Total AP License Count                           :16

Total PEF License Count                         :26

Total RF Protect License Count                :26

Total XSEC License Count      :0

Total ACR License Count                        :0

Guru Elite
Posts: 8,460
Registered: ‎09-08-2010

Re: 7030 controller license question

[ Edited ]

When more than 16 APs are connected, are they completely up with radios serving clients? (no L flag next to them or amber lights...)


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Regular Contributor II
Posts: 240
Registered: ‎09-11-2013

Re: 7030 controller license question

Yeah fully operational with no flags and clients connected to them.

Search Airheads
Showing results for 
Search instead for 
Did you mean: