11-28-2013 06:34 AM
We are in the process of upgrading to 7220 controllers and my standard monitoring templates that I use with SNMP don't work for the fans on the 7220.
I did a mib walk and I don't see any mention of the fan status in the mib 'aruba-systemext.my' as I did on M3 and 3000 series controllers.
The OIDs I was using are:
Fan 1 - 184.108.40.206.4.1.148220.127.116.11.18.104.22.168.2.0
Fan 2 - 22.214.171.124.4.1.148126.96.36.199.188.8.131.52.2.1
Fan 3 - 184.108.40.206.4.1.148220.127.116.11.18.104.22.168.2.2
Fan 4 - 22.214.171.124.4.1.148126.96.36.199.188.8.131.52.2.3
I do see the fans however if I do a show inventory:
Fan 0 : 8987 rpm (5.517 V),Speed Low
Fan 1 : 9029 rpm (5.495 V),Speed Low
Fan 2 : 9039 rpm (5.495 V),Speed Low
Fan 3 : 9039 rpm (5.630 V),Speed Low
So does anyone know if these OIDs have been moved into another MIB or are they just missing completely?
My controller is a 7220 running 184.108.40.206
11-28-2013 07:38 AM
Did you try looking in the 220.127.116.11 MIB File?
Consulting Systems Engineer - ACCX, ACDX, ACMX
If you found my post helpful, please give kudos