Wireless Access

I have just migrated from 6000 to 7200 controllers.  I have 3 locals and a master.  For the migration I backed up the flashbackup from the 6000 and restored the flashbackup on the 7200s.  On one of the locals when I type the command "show AP database long status  down" it shows 871 AP's down.  But the down AP's do not terminate to this controller.  I checked on the correct controller and the AP's are up.  

Miller Grove HS AP-50    DCSS-Dispac  105      1.1.1.253   Up 5d:14h:31m:38s  Rc2    6c:f3:7f:ca:6b:09  BT0266733  N/A   N/A   10.119.204.4

Miller Grove HS AP-50    DCSS-Dispac  105      2.1.8.252   Down    R-c2   6c:f3:7f:ca:6b:09  BT0266733        N/A   10.119.204.42

Question: If I run the clear the gap-db will the AP have to be reprovised?  Is there a way to clear all of the down APs and not have a major problem?  Clear the LMS? 

You can clear the database using the "clear gap-db ?" command (there is ? at the end because there are multiple options for clearing a particular AP, all APs with a certain LMS, etc).

The APs will NOT have to be reprovisioned. The APs that are up will be recreated in the gap-db. The APs that are down will go away and not come back.

What version AOS are you using ?

I seen this issue before where the local and the master are not syncing correctly and the workaround was to reload the master.

Can you do a a show switches to make sure that the master is able to see the locals and also do a show log system to see if it shows any issues with communication between the local and the controllers

All of the down AP's have a lms of another controller.

clear gap-db lms 10.xx.xx.xx