Wireless Access

Reply
Regular Contributor I

7210 Controllers LCD Panel totally Amber

Dear experts,

 

In my envorinment 7210 controllers are running in Master standby mode along with database synchronization features. Everything is working fine but the POWER LED and STATUS LED on both controllers are solid amber.

This issue is being happened today. 

 

What is going wrong on my equipments ?

Guru Elite

Re: 7210 Controllers LCD Panel totally Amber

Picture, please.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Regular Contributor I

Re: 7210 Controllers LCD Panel totally Amber

Dear Cjoseph 

 

I didnt take picture but ports on the both controllers are properly operational but the LCD status showing POWER Led and STATUS Led both are solid orange .

 

 

Guru Elite

Re: 7210 Controllers LCD Panel totally Amber

According to the 7200 series controller installation guide, that means you  could have a critical alarm. 

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/10377/Default.aspx

 

You should contact TAC to see if you have a hardware issue.

 

7200.JPG


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: