Wireless Access

Reply
Occasional Contributor II
Posts: 32
Registered: ‎10-04-2011

7220 Controller and OSPF%0D%0A

We have a new 7220 Controller and we are generally a Cisco house for routers and switches. We recently discovered that something in our new controller is causing our routes to reconverge and don't know where to look. Any thoughts?

Guru Elite
Posts: 21,279
Registered: ‎03-29-2007

Re: 7220 Controller and OSPF%0D%0A

[ Edited ]

Do you have OSPF enabled on your controller?  Disable it...



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 32
Registered: ‎10-04-2011

Re: 7220 Controller and OSPF%0D%0A

All of our routers are setup to use OSPF and all of the 7220 controllers are as well. Can you tell me more about why I need to disable OSPF on the controllers?

Guru Elite
Posts: 21,279
Registered: ‎03-29-2007

Re: 7220 Controller and OSPF%0D%0A

Without knowing anything about your problem besides what you typed, If you have a problem with it, disable it.  Put in static routes and then put the OSPF configs interface by interface until you find out what the problem is.  There is nothing wrong in general with OSPF, but it has a very specific use case and in most situations not necessary.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: