08-28-2013 08:24 AM
Is there a command to enable the 10 gig port? When I log into the controller interface, all I see is:
interface gigabitethernet 0/0/2
trusted vlan 1-4094
I plugged in an Aruba 10gig SFP and the description still didn't change. Is this supposed to be a plug and play or are there some extra configurations I have to work up in order to put the interface in 10gig capability mode?
08-28-2013 12:48 PM
The interface is still shown as a "gigabitethernet" even if you plug an SFP+ (i.e. 10gigE).
Do a "show interface gigabitethernet 0/0/2" and it should say something like "Hardware is 10 Gigabit Ethernet"