Wireless Access

Reply
New Contributor

802.11w behavior Aruba Instant

Hello all

I'm testing the behavior of different vendors on 802.11w. I have an Aruba instant AP103 firmware version 6.5.2.0. I enabled 802.11w by the cli commands mfp-capable and mfp-required (as it seems not possible by the GUI). However, from the moment I enable mfp-capable the RSNIE in the beacons from the SSID is dissapeared (I capture by airtool and wireshark), is this normal behavior? I just try to understand 802.11w better between the different vendors.

Thx!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: