Wireless Access

Reply
Contributor I
Posts: 31
Registered: ‎02-23-2016

802.1x when a RAP is in Bridged mode?

Hi all,

 

Am I right in saying that when a RAP is configured in bridge mode a clients authentication must be 802.1x?

MVP
Posts: 778
Registered: ‎03-25-2009

Re: 802.1x when a RAP is in Bridged mode?

 

Captive portal authentiction is not supported for an AP in bridge mode. You could still use 802.1x auth or no aythentiction (open, WPA-PSK). Split-tunnel might also achieve what you need while allowing CP auths.

That said, you might get a more usefull answer if you explain us what you are trying to achieve.

Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found something helpful, important, or cool? Click the Kudos Star in a post.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
Showing results for 
Search instead for 
Did you mean: