Wireless Access

Reply
New Contributor
Posts: 2
Registered: ‎03-18-2015

802.1x with internal db and Radius server in server group

We have setup dot 1x authentication using windows radius server. We also want to add internal db in the server group so users which are on internal db can also be authenticated using dot1x. Is it possible? We already enabled termination on aruba controller and clients are authenticate using Radius server.

 

We need an same ssid which can authenticate users both on Radius server and user on internal db.

 

Note : We already applied server certificate in controller.

Guru Elite
Posts: 20,784
Registered: ‎03-29-2007

Re: 802.1x with internal db and Radius server in server group

You would also need to enable "Fail through" on the server group.  Make sure termination and 802.1x already works before adding the internal database.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 2
Registered: ‎03-18-2015

Re: 802.1x with internal db and Radius server in server group

Enabled "Fail through" on the server group, now both radius and Internal DB authentication is working. But we have another issue now for creating users with guest role in internal DB it is accessible by all ssid. It should work only in guest ssid alone. Is it possible to do this.

Guru Elite
Posts: 20,784
Registered: ‎03-29-2007

Re: 802.1x with internal db and Radius server in server group

It is not possible to separate this, no.  



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Guru Elite
Posts: 8,323
Registered: ‎09-08-2010

Re: 802.1x with internal db and Radius server in server group

You should consider using an external RADIUS server.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: