Wireless Access

Reply
Frequent Contributor I

A way to display AP's upstream switch port

Does anyone know of a report or a filter view in AirWave that will show the switch port that an AP is connected to? I can get the AP's MAC address-to-switchport mapping info from the CLI, but I also have a filter view set up in AirWave that includes the AP name and MAC - it would be great if that view could also include the switchport that the AP connects to.

 

Thanks.

Frequent Contributor I

Re: A way to display AP's upstream switch port

Think I have something that will work (at least for my purposes): in the MAS web GUI, under 'Dashboard', you can go to 'Neighbor Devices' and find a mapping of MAC address to switch port to System Name, which is pretty much what I was after. You can sort or filter on those columns to narrow it down to what you want to see.

Occasional Contributor II

Re: A way to display AP's upstream switch port

I am also curious about this - we need to do an audit of our documentation after a recent install and I see that you can list out the upstream device  in the device view, but it doesn't seem that you can specify the port of that device. This would save us a lot of manual audit time if there was a way to view/report on this from Airwave....

 

Thanks.

Frequent Contributor I

Re: A way to display AP's upstream switch port

Disclaimer- this may not be the safest or most efficient method, but it works

 

LLDP Neighbor info can be found in the output of show ap tech-support ap-name "apname"

You can use AirRecorder (from the Aruba utilities page) to dump this info to a file. Then grep for relevant lines or filter in Excel.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: