Wireless Access

Cisco ASA's refer to it as Service Object Groups.  These are named groups which "houses" a collection of preconfigured service objects.  "Service objects" are either tcp, udp, or tcp/udp groupings or ports on a 1:1 ratio.  

In Aruba's realm, we see service objects as  netservice names in which we can apend up to 6 ports.

Does Aruba have something simular to the Service Object Groups where you can create a group name, and then reference multiple "service objects" underneath it?

In the eyes of an ACE-Table, creating a group to call on a bunch of listed services could be beneficial and lower the ACE count cost, couldn't it?

Lastly, is there a possibility to include multiple Port Ranges?  meaning,    
netservice my_netservice_name tcp 135 139, 15024 15124

There is nothing in Aruba that would allow multiple service objects to be applied as a group at this time.  You can however request that functionality on the Ideas Portal here:  https://sso.arubanetworks.com/idp/rp6Pf/resumeSAML20/idp/startSSO.ping

After looking through things, I didn't think there was -- thus the forum post.  :)

Thank you sir.  Will be doing a request.