Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AMP Reboots

This thread has been viewed 0 times

  • 1.  AMP Reboots

    Posted Sep 11, 2014 10:30 AM

    I have 4 AMPs on the network.  Sometimes I get an alert that the AMP has rebooted.  It could be a power or some network issue.  Is there a log that can give some clue as to what might be happening?

     

    Code: 8.0.3

    Master and 3 Amps



  • 2.  RE: AMP Reboots

    EMPLOYEE
    Posted Sep 11, 2014 10:31 AM
    Are they virtual? Is your hypervisor reporting that it rebooted?


  • 3.  RE: AMP Reboots

    EMPLOYEE
    Posted Sep 18, 2014 10:58 AM

    The Master Console should be able to trigger on 'Managed AMP Down' events.  Beyond that, you're wanting to look at: /var/log/messages, /var/log/acpid, /var/log/low_level_service_watcher, /var/log/service_watcher, /var/log/boot.