Wireless Access

Reply
Occasional Contributor II

AMP UCC

I have Vocera clients on a voice SSID. When I make calls, the usernames & call detail appear on my Aruba WLC with version 6.3.1.7, but this data does not show up on AMP version 8.0 (UCC). I listed them as "watched clients". Not sure what else to do. Ideas?

Guru Elite

Re: AMP UCC

Do you have AMON enabled?

Also, make sure you have UCC enabled in the AMP setup.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II

Re: AMP UCC

Thank you.

 

I have the following:

 

Enable UCC Data Collection - (yes)

Enable AMON Data Collection: - (yes)

 

 

Guru Elite

Re: AMP UCC

On the controller side, did you run the mgmt-server command to point to Airwave?

 

 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor II

Re: AMP UCC

Yes, it is pointing and I do see AppRF data, but no voice/username information for my voice clients on AMP. Perhaps I restart thre AMP services or adjust the polling intervals?

Re: AMP UCC

You need AOS 6.4 to get this information

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: AMP UCC

2014-06-25 13_53_16-ArubaOS_6.4_RN.pdf.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II

Re: AMP UCC

Perfect! Thank you!
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: