Wireless Access

last person joined: 13 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AMP templates and IAP blacklists

This thread has been viewed 0 times

  • 1.  AMP templates and IAP blacklists

    Posted Feb 17, 2014 06:26 AM

    Hello,

              We have added several client mac addresses to an IAP blacklist that has created a mismatch on our AMP server  - is there a way to ammend the template so that it won't generate this mismatch? The AMP server is running 7.6.5 soon to be upgraded to 7.7.9.

     

    Many Thanks

     

    Mike



  • 2.  RE: AMP templates and IAP blacklists

    Posted Feb 17, 2014 07:31 AM

    You can navigate to the Aps/Devices -> Click on the wrench icon next to the VC.

     

    Scroll to the bottom and click on "Import settings".


    If that does not do it, then click on Audit, fetch and import the template again.



  • 3.  RE: AMP templates and IAP blacklists

    Posted Feb 17, 2014 07:52 AM

    Thanks for the reply - sadly neither method clears the mismatch on AMP. What I really want is the command(s) I can add to the template so that it won't audit any configuration regarding the blacklist. The estate is some 8000 sites and so getting this template right is rather crucial.

     

    Thanks

     

    Mike 



  • 4.  RE: AMP templates and IAP blacklists

    Posted Feb 17, 2014 08:46 AM

    in the template, do the following

     

    blacklist-client de:ad:be:ef:ca:fe

     

    Capture.JPG

     

    That should do it I think



  • 5.  RE: AMP templates and IAP blacklists

    Posted Mar 03, 2014 02:17 PM

    Sorry for the delay - no that didn't work either , has anyone used 

     

    <ignore_and_do_not_push>blacklist</ignore_and_do_not_push>

     

    in the template and got it working?

     

    Regards

     

    Mike