Wireless Access

Reply
Contributor II
Posts: 41
Registered: ‎03-18-2013

AMP templates and IAP blacklists

Hello,

          We have added several client mac addresses to an IAP blacklist that has created a mismatch on our AMP server  - is there a way to ammend the template so that it won't generate this mismatch? The AMP server is running 7.6.5 soon to be upgraded to 7.7.9.

 

Many Thanks

 

Mike

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: AMP templates and IAP blacklists

You can navigate to the Aps/Devices -> Click on the wrench icon next to the VC.

 

Scroll to the bottom and click on "Import settings".


If that does not do it, then click on Audit, fetch and import the template again.

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Contributor II
Posts: 41
Registered: ‎03-18-2013

Re: AMP templates and IAP blacklists

Thanks for the reply - sadly neither method clears the mismatch on AMP. What I really want is the command(s) I can add to the template so that it won't audit any configuration regarding the blacklist. The estate is some 8000 sites and so getting this template right is rather crucial.

 

Thanks

 

Mike 

MVP
Posts: 1,437
Registered: ‎10-25-2011

Re: AMP templates and IAP blacklists

in the template, do the following

 

blacklist-client de:ad:be:ef:ca:fe

 

Capture.JPG

 

That should do it I think

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Contributor II
Posts: 41
Registered: ‎03-18-2013

Re: AMP templates and IAP blacklists

Sorry for the delay - no that didn't work either , has anyone used 

 

<ignore_and_do_not_push>blacklist</ignore_and_do_not_push>

 

in the template and got it working?

 

Regards

 

Mike

Search Airheads
Showing results for 
Search instead for 
Did you mean: