Wireless Access

Reply
Contributor I

AOS8 - Configure Branch controller to act like a RAP

Hello,

 

I want to use a controller as a RAP.

 

The situation is like this:

We use Aruba AOS 8

We have a Mobility Master at the top.

I have a controller inside the DMZ in the main datacenter. This controller is an MD under the MM

I have added the RAP config like pools and so on.

When a use a RAP it get connected to the controller and works fine.

 

Now I want for another (branch) location to use a controller to act like a RAP.

What do I need to configure?

 

On this controller also AP’s need to be terminated and some vlan’s will be local but other vlan’s needs to be stretched to the DMZ controller.

 

 

----------------------------------------------------------------------------------------
Aruba ACCX #748, ACDX #758, ACMP, ACEAP | HPE Master ASE
Contributor I

Re: AOS8 - Configure Branch controller to act like a RAP

The solution is to build al GRE tunnel interface between 2 controllers (over an existing vpn). Within this tunnel, you can define what vlan needs to be transported.

----------------------------------------------------------------------------------------
Aruba ACCX #748, ACDX #758, ACMP, ACEAP | HPE Master ASE
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: