Wireless Access

Reply
Contributor II
Posts: 40
Registered: ‎05-01-2015

AOS8 Master Controller Mode openflow-profile alert

Hi,

 

I'm setting up wireless at a customer. I have chosen to use AOS8 on 2 7205 controllers without a MM in Master - Redundant Master mode. When budget allows they might invest in a MM but the budget is set pre AOS8.

I see the following alert on both controllers: "openflow-profile is not supported in Master Controller Mode"

I get the same error when I try to delete/disable the openflow-profile. Is there any way to get rid of this alert? ArubaOS 8.1.0.1

 

txs, Erik

MVP
Posts: 1,410
Registered: ‎11-07-2008

Re: AOS8 Master Controller Mode openflow-profile alert

You are seeing this in the alerts on the GUI?

Jerrod Howard
Sr. Techical Marketing Engineer
Contributor II
Posts: 40
Registered: ‎05-01-2015

Re: AOS8 Master Controller Mode openflow-profile alert

Yes, it comes up as an alert in the upper message section of the GUI. I tried removing the profile from the CLI but that gave the same error.

 

I stopped configuring AOS8 and went back to 6.5 at this customer because I ran into too much unknowns and not enough time to figure them out. More labtime needed here. 

 

txs, Erik

Search Airheads
Showing results for 
Search instead for 
Did you mean: