Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP 105 and static ip's

This thread has been viewed 0 times

  • 1.  AP 105 and static ip's

    Posted Dec 08, 2014 07:27 AM

    Chaps/Ladies, I have a need to assign 3 statics to 105's.   Yes I know its not ideal.  Have set 1 as below,

     

    Hit <Enter> to stop autoboot: 0
    apboot> printenv
    bootdelay=2
    baudrate=9600
    autoload=n
    boardname=Talisker
    servername=aruba-master
    bootcmd=boot ap
    autostart=yes
    bootfile=mips32.ari
    ethaddr=18:64:72:cf:1e:e3
    ethact=eth0
    ipaddr=192.168.10.2
    netmask=255.255.255.248
    gateway=ip 192.168.10.1
    master=10.120.106.30
    gatewayip=192.168.10.1
    gatewayip0=192.168.10.1
    stdin=serial
    stdout=serial
    stderr=serial

     

     

     

    Can ping the gateway from the AP, and the Controller, but not vice versa, hence the ap not coming up.  Any ideas ?



  • 2.  RE: AP 105 and static ip's

    EMPLOYEE
    Posted Dec 08, 2014 10:14 AM

    It almost sounds like a networking issue...



  • 3.  RE: AP 105 and static ip's

    Posted Dec 08, 2014 11:38 AM

    Yes I think it was, now DHCP and manual DNS entry has resolved it.

     

    Ta