Wireless Access

Reply
Frequent Contributor II

AP 105 and static ip's

Chaps/Ladies, I have a need to assign 3 statics to 105's.   Yes I know its not ideal.  Have set 1 as below,

 

Hit <Enter> to stop autoboot: 0
apboot> printenv
bootdelay=2
baudrate=9600
autoload=n
boardname=Talisker
servername=aruba-master
bootcmd=boot ap
autostart=yes
bootfile=mips32.ari
ethaddr=18:64:72:cf:1e:e3
ethact=eth0
ipaddr=192.168.10.2
netmask=255.255.255.248
gateway=ip 192.168.10.1
master=10.120.106.30
gatewayip=192.168.10.1
gatewayip0=192.168.10.1
stdin=serial
stdout=serial
stderr=serial

 

 

 

Can ping the gateway from the AP, and the Controller, but not vice versa, hence the ap not coming up.  Any ideas ?

ACMA/ACMP
Guru Elite

Re: AP 105 and static ip's

It almost sounds like a networking issue...



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor II

Re: AP 105 and static ip's

Yes I think it was, now DHCP and manual DNS entry has resolved it.

 

Ta

ACMA/ACMP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: