Wireless Access

Reply
New Contributor
Posts: 3
Registered: ‎03-27-2012

AP-105 cannot associate with 3200XM Controller

Dear all, I am not an expert in configuring Aruba controllers, so my question may not be appropriate if you will.  I followed a video training and I applied that config as close as I could into my 3200XM which is my lab equipment.  I do have licenses loaded, but I can not end up seeing the AP on the controller.  Below is the config could you please help?  thanks

 

Attached file opens with textpad, notepad

 

Guru Elite
Posts: 20,801
Registered: ‎03-29-2007

Re: AP-105 cannot associate with 3200XM Controller

is the access point on the same subnet as the controller?

Is something supplying DHCP to the AP?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎03-27-2012

Re: AP-105 cannot associate with 3200XM Controller

I am plugging the AP on Port 1/1 which is on the native VLAN1, 172.16.0.254/24.

 

 

Guru Elite
Posts: 20,801
Registered: ‎03-29-2007

Re: AP-105 cannot associate with 3200XM Controller

Something needs to provide DHCP on that VLAN.  You need to create a DHCP scope on that controller so that the AP can get an ip address.   Go to Configuration> Network> IP > DHCP to create a DHCP scope in that range and enable the DHCP service.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎03-27-2012

Re: AP-105 cannot associate with 3200XM Controller

This is the management VLAN that is the default of the controller.  So at this point i am not sure how to do it.  thanks

Guru Elite
Posts: 20,801
Registered: ‎03-29-2007

Re: AP-105 cannot associate with 3200XM Controller

Go to configuration> Network > IP> DHCP Server.  Click on the enable checkbox to enable the DHCP server.  Next, Add a DHCP server pool and make the network 172.16.0.0 netmask 255.255.255.0 dns 8.8.8.8 and default gateway 172.16.0.254 and click on apply.

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: