Wireless Access

last person joined: 20 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-105 drawing too much power

This thread has been viewed 2 times

  • 1.  AP-105 drawing too much power

    Posted Feb 10, 2014 10:27 PM

    Hi Community,

     

    Several AP-105s we have observed is intermittently drawing too much power (more than 15.4mW) and I've been trying to get as much information on how to deal about it. For now, we have to manually set the switchport power setting. What could be the possible reason why it may draw too much power? We checked the cables and they are less than 100m. 

     

    Thanks

     

    Oliver



  • 2.  RE: AP-105 drawing too much power

    Posted Feb 10, 2014 10:38 PM

    Hi Oliver,

     

    What is the switch that you are using?



  • 3.  RE: AP-105 drawing too much power

    Posted Feb 10, 2014 11:12 PM

    Hi,

     

    We are using brocade ICX 6610-48P switches.

     

    Thanks

     

    Oliver



  • 4.  RE: AP-105 drawing too much power

    EMPLOYEE
    Posted Feb 11, 2014 05:49 AM

    Oliverm,

     

    Please contact Aruba TAC about this issue.



  • 5.  RE: AP-105 drawing too much power

    Posted Feb 11, 2014 12:12 PM

    As CJoseph pointed out, open a TAC case but I would be curious to know if you're 105s are in hybrid mode? Meaning do you have hybrid spectrum monitoring enabled?

     

    EDIT: specifically on the 5ghz band