Wireless Access

Occasional Contributor II

AP-105 drawing too much power

Hi Community,


Several AP-105s we have observed is intermittently drawing too much power (more than 15.4mW) and I've been trying to get as much information on how to deal about it. For now, we have to manually set the switchport power setting. What could be the possible reason why it may draw too much power? We checked the cables and they are less than 100m. 





Super Contributor I

Re: AP-105 drawing too much power

Hi Oliver,


What is the switch that you are using?

Normal Guy
Occasional Contributor II

Re: AP-105 drawing too much power



We are using brocade ICX 6610-48P switches.





Guru Elite

Re: AP-105 drawing too much power



Please contact Aruba TAC about this issue.

Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Re: AP-105 drawing too much power

As CJoseph pointed out, open a TAC case but I would be curious to know if you're 105s are in hybrid mode? Meaning do you have hybrid spectrum monitoring enabled?


EDIT: specifically on the 5ghz band

Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: