Wireless Access

Reply
Occasional Contributor I
Posts: 9
Registered: ‎02-20-2013

AP-105 in AP-mode with Spectrum monitoring enable in 5Ghz not working

Setting ap-105 in full spectrum mode works fine for the 2.4 and 5Ghz spectrum analyser, but when setting the AP in hybrid mode, it only shows the 2.4Ghz in spectrum analyser.  Is this a bug, a misconfiguration or a normal behavior for this AP in hybrid mode?

 

 

Contributor II
Posts: 59
Registered: ‎02-17-2012

Re: AP-105 in AP-mode with Spectrum monitoring enable in 5Ghz not working

This is really a problem for us, as well.  We can't do any sort of spectrum analysis in 5Ghz on 105s.  Does anyone know if this is intended or not?

Moderator
Posts: 681
Registered: ‎04-16-2009

Re: AP-105 in AP-mode with Spectrum monitoring enable in 5Ghz not working

[ Edited ]

This is a known issue and is identified in the Field Bulletin found -here- .  Look for the Field Bulletin called Avoiding 100 Series access points power amplifier failure - Tuesday, November 19, 2013".

 

Beginning with AOS 6.1.3.6 and 6.2 and higher you can no longer do "hybrid spectrum" on the 5GHz radio on the AP-104 / 105. Other AP models are not affected.

 

The -104 / 105 do support Spectrum in 5GHz but in Dedicated mode only. Both modes are supported on the 2.4GHz radio.

Search Airheads
Showing results for 
Search instead for 
Did you mean: