Wireless Access

Reply
Frequent Contributor II

AP-105 second radio stuck at am mode

Hi Guys,

 

i'm implementing a new controller 7210 at my cust's site with few new AP 205 and 225.

everything works fine but the old AP-105.

all APs are using same config from the same AP Group but all my AP-105's second radio (11a) always stuck at am mode.

below is the result of 2 APs (105 and 205) show ap active:


APGRP_1  192.168.34.72   1            AP:HT:11/18/22.5     0            AM                   105      2aKr   1d:15h:36m:27s  N/A
APGRP_1  192.168.35.78   10           AP:HT:11/18/22       5            AP:VHT:161/18/24     205      2aKr   2d:18h:50m:47s  N/A

 

what config might causes this? i'm using 6.4.2.12

 

Ricky

Ricky E. Lee
CWNA | ACMP | ACCP

Re: AP-105 second radio stuck at am mode

You sure they are in the same group? Looks like two different groups since group name is right before the IPAddr.

Jerrod Howard
Sr. Techical Marketing Engineer
Frequent Contributor II

Re: AP-105 second radio stuck at am mode

Ho Jerrod,

yes they are on the same group. i edited the name because it contains cust's name, just a typo. they are one the same  group.

 

Ricky

Ricky E. Lee
CWNA | ACMP | ACCP

Re: AP-105 second radio stuck at am mode

Run a 'show ap allowed-channels ap-name <ap105 name>' and the same for a 205 and see what the output is. You may want to download a new DRT file if it shows unavailable channels on the 5Ghz for the AP-105. Are there any disallowed channels in the config? What country-code?

 

Otherwise I am not 100% sure. 

Jerrod Howard
Sr. Techical Marketing Engineer
Frequent Contributor II

Re: AP-105 second radio stuck at am mode

Hi Jerrod,

 

#show ap regulatory
Regulatory Version :1.0_51155

 

i upgraded the DRT:

#show ap regulatory
Regulatory Version :1.0_52480

 

my supported channels:

 #show ap allowed-channels country-code id

Allowed Channels for Country Code "ID" Country "Indonesia"
----------------------------------------------------------
PHY Type                 Allowed Channels
--------                 ----------------
802.11g (indoor)         1 2 3 4 5 6 7 8 9 10 11 12 13
802.11a (indoor)         149 153 157 161
802.11g (outdoor)        1 2 3 4 5 6 7 8 9 10 11 12 13
802.11a (outdoor)        149 153 157 161
802.11g 40MHz (indoor)   1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13
802.11a 40MHz (indoor)   149-153 157-161
802.11g 40MHz (outdoor)  1-5 2-6 3-7 4-8 5-9 6-10 7-11 8-12 9-13
802.11a 40MHz (outdoor)  149-153 157-161
802.11a 80MHz (indoor)   149-161
802.11a 80MHz (outdoor)  149-161
802.11a (DFS)            None

 

but my 105 still doesnt work at 11a

#show ap allowed-channels ap-name AP_GU-LT1_PDG
Allowed Channels for AP "AP_GU-LT1_PDG" Country Code "ID" Country "Indonesia"
-----------------------------------------------------------------------------
PHY Type                 Allowed Channels
--------                 ----------------
802.11g (indoor)         1 2 3 4 5 6 7 8 9 10 11 12 13
802.11a (indoor)         None
802.11g (outdoor)        1 2 3 4 5 6 7 8 9 10 11 12 13
802.11a (outdoor)        None
802.11g 40MHz (indoor)   None
802.11a 40MHz (indoor)   None
802.11g 40MHz (outdoor)  None
802.11a 40MHz (outdoor)  None
802.11a (DFS)            None

Ricky E. Lee
CWNA | ACMP | ACCP
Frequent Contributor II

Re: AP-105 second radio stuck at am mode

the problem was in my regulatory domain.

issue solved by changing the regulatory to another country.

 

Ricky

Ricky E. Lee
CWNA | ACMP | ACCP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: