Wireless Access

Reply
Occasional Contributor I
Posts: 5
Registered: ‎11-26-2014

AP-110 Series AP connected on EX Juniper switch. No controller

I have a 110 series Aruba ap connected directly to a juniper switch. we do not have a controller. I want to provision internet but the Aruba Instant SSID does not show up on wifi list. Please help, i'm new to all this.

Guru Elite
Posts: 8,330
Registered: ‎09-08-2010

Re: AP-110 Series AP connected on EX Juniper switch. No controller

Is it an IAP-115 or an AP-115?


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
New Contributor
Posts: 3
Registered: ‎03-16-2013

Re: AP-110 Series AP connected on EX Juniper switch. No controller

access point it got IP address form DHCP server or fix up address ?
Occasional Contributor I
Posts: 5
Registered: ‎11-26-2014

Re: AP-110 Series AP connected on EX Juniper switch. No controller

It is an AP-115 (Model APIN0115). There is no DHCP on the network. There is a tp-link AP which is easy to setup but we got the Aruba just to extend to another office area.

Occasional Contributor I
Posts: 5
Registered: ‎11-26-2014

Re: AP-110 Series AP connected on EX Juniper switch. No controller

No DHCP server, I want to configure a static IP.

on the switch lldp neighbors show

ge-0/0/7.0         -                   ac:a3:1e:ca:9a:f0   bond0              Dav_Proj_Off

 

switch>show configuration interfaces ge-0/0/7 | display set
set interfaces ge-0/0/7 enable
set interfaces ge-0/0/7 ether-options speed 1g
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/7 unit 0 family ethernet-switching vlan members HSI

Guru Elite
Posts: 8,330
Registered: ‎09-08-2010

Re: AP-110 Series AP connected on EX Juniper switch. No controller

the AP-115 is controller-based. You will need a controller.

 

The controllerless model is the IAP-115.


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I
Posts: 5
Registered: ‎11-26-2014

Re: AP-110 Series AP connected on EX Juniper switch. No controller

Thanks. So there's no way to configure or use it without a controller?

Guru Elite
Posts: 8,330
Registered: ‎09-08-2010

Re: AP-110 Series AP connected on EX Juniper switch. No controller

Correct. If it's a new AP, you should request a change order for the IAP variant.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Occasional Contributor I
Posts: 5
Registered: ‎11-26-2014

Re: AP-110 Series AP connected on EX Juniper switch. No controller

Thank you, I thought I was going crazy the whole day. 

Search Airheads
Showing results for 
Search instead for 
Did you mean: