03-01-2012 07:02 AM
I am trying to connect a VoIP phone to the eth1 on a AP 135 but i keep getting the following :
shutting down eth1 due to insufficient POE voltage [power profile 2]
Operational State POE: One Ethernet port disabled; 3 Tx chains per radio
And i was wondering what's the PoE requirements for an AP 135 turn it's eth1 port.
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Solved! Go to Solution.
03-01-2012 07:22 AM
When using POE to power the unit, and AP-135 wil only enable the second ethernet port if the POE source is 802.3at compliant.
Whe using DC power (12V), the second port is always enabled.