Wireless Access

Reply
New Contributor
Posts: 1
Registered: ‎03-13-2013

AP 135 is constantly rebooting.

I have a AP 135 that constantly reboots. I have purged and reset it, but still get a constant reboot. The following is the output i get when connected via the console connection:

 

APBoot 1.2.6.7 (build 30025)
Built: 2011-08-30 at 17:41:16

Model: AP-13x
CPU: 88F6560 A0 (DDR3)
Clock: CPU 1600MHz, L2 533MHz, SysClock 533MHz, TClock 200MHz
DRAM: 256MB
POST1: mem 2 (Mismatch at 00b00000: Expected ffb0ff00 got fbb0ff00) FAILED!
Flash: 16 MB
Power: 802.3af POE
LAN: done
PHY: done
PEX 0: RC, link up, x1
bus.dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00.00 00 11ab 6560 00005 02 f1000000 00000000 00000000 00000000
00.01 00 168c 0030 00002 01 90000000 00000000 00000000 00000000
PEX 1: RC, link up, x1
bus.dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
01.00 00 11ab 6500 00005 02 f1000000 00000000 00000000 00000000
01.01 00 168c 0030 00002 01 94000000 00000000 00000000 00000000
Net: eth0, eth1
Radio: ar9390#0, ar9390#1

Hit <Enter> to stop autoboot: 0

 

 

Any fixing this AP or is it time to trash it and replace it?

 

Guru Elite
Posts: 8,467
Registered: ‎09-08-2010

Re: AP 135 is constantly rebooting.

Looks like there may be an issue with the memory. I would initiate an RMA.

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
Showing results for 
Search instead for 
Did you mean: