Wireless Access

Reply
nzo
New Contributor

AP-135 reset problems

Hello, I am having some difficulty doing a reset on a AP-135. I have attached log file. Any help would be greatly appreciated.

Retired Employee

Re: AP-135 reset problems

This AP 135 is an IAP and it is joining the IAP cluster. Are you trying to use this AP as a campus AP?
--
HT
nzo
New Contributor

Re: AP-135 reset problems

Yes, that is the plan. I need to reset back to factory defaults. My initial vlan setup was incorrect, and now I cant connect or access WebUI.

 

Retired Employee

Re: AP-135 reset problems

In that case, you will have to convert the IAP into a campus AP. 

 

1.Connect the AP to a separate subnet so that it will come up as the virtual master and you can log into the web UI of the AP. 

2. Maintenance -> Convert 

Convert one of more Access Points t0:

Campus APs managed by a Mobility Controller 

 

-> Enter IP address of the Mobility controller 

-> Hit Convert Now. 

 

You should see the AP come up on your controller. 

 

 

--
HT
nzo
New Contributor

Re: AP-135 reset problems

Thanks, I will give it a shot. That worked, Thanks You very much!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: