Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP 204 with External Antenna

This thread has been viewed 0 times

  • 1.  AP 204 with External Antenna

    Posted Feb 08, 2016 01:02 PM

    Hi,

     

    I have a quick question about connecting AP 204 with external antenna.

    in our current setup we want to establish Mesh and for that we are using AP 204 with AP-ANT-28, 7.5 dbi antenna.

    now physicaly checking the AP it has 2 points to connect antenna ant0 and ant1 also at the antenna side it has 2 cables marked as +45 and -45.

    i just need to confirm if i can connect the cabels randomly to any of the point on the antenna or specificly i have to connect the cabel on the AP.



  • 2.  RE: AP 204 with External Antenna

    Posted Feb 09, 2016 03:13 AM

    Hi

     

    Since it's a cross-polarized antenna, you can connect it either way, it doesn't matter which cable goes to ant0 and ant1.