Wireless Access

Reply
Frequent Contributor I

AP-225 - Restricted vs Unrestricted Power

Other than going on a switch where the AP is terminated to see how much power the AP 225 is drawing, is there a way to check in the controller to see if an AP 225 is running in a restricted mode vs unrestricted mode as it relates to the AP getting full 802.13at power vs 802.3af power?

Guru Elite

Re: AP-225 - Restricted vs Unrestricted Power

#show ap debug system-status ap-name <ap-name> | begin Power

 

ap-debug-power.PNG


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480

Re: AP-225 - Restricted vs Unrestricted Power

Good question.  It can be done for an individual AP.

 

show ap ht-rates bssid <bssid>

 Rates that are not supported will be in brackets []

 

I can't seem to find a command that lists all aps nicely with a column there that says '1ss' though.  It might exist, but I don't know what it is.

 

 


If my post is helpful please give kudos, or mark as solved if it answers your post.

ACCP, ACMP, ACMX #294
mclarke@arubanetworks.com
Frequent Contributor I

Re: AP-225 - Restricted vs Unrestricted Power

Thanks much Tim, thats what I was looking for.

 

Anyway this can be viewed on a more global scale without having to run a command per AP?

 

I am thinking more of a flag setting somewhere, but have not found anything yet if one does exist.

 

Guru Elite

Re: AP-225 - Restricted vs Unrestricted Power

Unforunately I don't think so because there is no AP status flag for this. 

 

Adding a restricted power flag would be a great feature request! You should submit it here:

 

https://arubanetworkskb.secure.force.com/cp/ideas/ideaList.apexp


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: