Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-225 pass through operation

This thread has been viewed 2 times

  • 1.  AP-225 pass through operation

    Posted Apr 02, 2014 11:20 AM

    Does the AP-225 support pass through operation on the wired Ethernet ports similar to how this exists on the AP-125, for example?

    I realize that doing this would defeat full 802.11ac capacity requirements, but this would be acceptable in order to start our deployment in areas that only have one wire drop.  Cabling would then be upgraded at a later point.



  • 2.  RE: AP-225 pass through operation
    Best Answer

    EMPLOYEE
    Posted Apr 02, 2014 11:22 AM

    Yes, you can use the second port as an access port as long as .at power is being supplied to the access point.



  • 3.  RE: AP-225 pass through operation

    Posted Apr 02, 2014 11:29 AM

    Great - thanks for the info Tim.  I couldn't be completely clear about it from the data sheets.