Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-225 - two ethernet interface scenario

This thread has been viewed 1 times

  • 1.  AP-225 - two ethernet interface scenario

    Posted Jun 05, 2015 03:43 PM

    Hi,

     

    I would like to configure two independent network: for employee and guest. I have two independent WAN connection so I would like to assign ETH0 interface to first WAN connection. This interface will be dedicated for employee. ETH 1 interface will be assigned to second WAN and dedicated for guest network. Is it possible using AP and controller or only IAP. If yes, how should I configure it?

    Thanks in advance!

     

     

    Regards,

    Mathew


    #AP225


  • 2.  RE: AP-225 - two ethernet interface scenario

    EMPLOYEE
    Posted Jun 05, 2015 03:46 PM
    If you have a controller, the best bet would be to hook the second leg into
    the controller, not the AP.


  • 3.  RE: AP-225 - two ethernet interface scenario

    Posted Jun 05, 2015 04:18 PM

    How about IAP? Is it possible to do it without controller?

     

    Regards,

    Mathew



  • 4.  RE: AP-225 - two ethernet interface scenario

    Posted Jun 06, 2015 02:53 PM

    Anybody help me resolve this issue?



  • 5.  RE: AP-225 - two ethernet interface scenario

    EMPLOYEE
    Posted Jun 06, 2015 04:48 PM

    Matthew0306,

     

    That scenario is not supported.