Wireless Access

Reply
Occasional Contributor I
Posts: 5
Registered: ‎03-30-2016

AP-275 Not powering up

One of our right AP-275 units is not powering up at all.  I've tried it on two separate PoE switches but get nothing.  I've also tried resetting it with the reset button.  I was getting ready to open it up and troubleshoot and repair it myself.  Anybody with experience working on one of these ap's have any idea what it might be or what I need to look for?

Guru Elite
Posts: 21,293
Registered: ‎03-29-2007

Re: AP-275 Not powering up

The AP-275 requires 802.3at power to work. http://www.arubanetworks.com/assets/ds/DS_AP270Series.pdf

 

 What kind of switch is this?

 

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor I
Posts: 5
Registered: ‎03-30-2016

Re: AP-275 Not powering up

It and the other seven AP-275's are all on an HP2910al-48g PoE switch.
They've all been running on that same switch for over a year. I tried
plugging it into other ports on the same switch and also to my HP 8200 PoE
backbone.

Wm. Wayne DuBose
IT Specialist | Angelina College |
936-633-5330 | wdubose@angelina.edu |
Guru Elite
Posts: 21,293
Registered: ‎03-29-2007

Re: AP-275 Not powering up

It seems like there could be a problem with that specific AP.  I would contact TAC.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: