Wireless Access

With the new 325's having management becons in them does anyone know how to find out the BLE MAC on them once they are on the controller?

show ap ble-table

That doesn't seem like a valid command, we are running 6.4.4.4 which is the lastest early deployment that supports these AP's

 

(aruba) #show ap ?
active                  Show APs currently registered on this switch
allowed-channels        Show the set of allowed channels
allowed-max-EIRP        Show max EIRP setting per country per AP type
ap-group                Show contents of AP's group
arm                     Show ARM Information
assoc-throttle-counte.. Show counters related to association request
                        throttling.
association             Show Association table for an AP
authorization-profile   Show an AP Authorization profile
band-steering-clients   Show Band Steering State
blacklist-clients       Show all clients being DoSed
blacklist-time          Show the amount of blacklist time of the STA when it
                        is blacklisted in between disconnection and
                        user-timeout
bss-table               Show bssids of all APs registered on this switch
bw-report               Show bandwidth allocation report for an AP
client                  Show wireless client specific information
config                  Show AP configuration parameters. Must specify
                        ap-name and/or ap-group and optionally essid.

Tim forgot a word :-)

 

(Aruba7010) #show  ap debug ble-table ap-name HomeOffice-225

 

BLE Device Table

----------------

MAC                HW_Type    FW_Ver        Flags   Status  Batt(%)  RSSI  Major#  Minor#  UUID                                  Tx_Power  Last Update  Uptime

---                -------    ------        -----   ------  -------  ----  ------  ------  ----                                  --------  -----------  ------

f4:b8:5e:43:42:aa  HAWTHORNE  OAD B 1.1-27  0x0103  IAH     --       -82   1000    2333    5152554E-F99B-4A3B-86D0-947070693A78  14        1s           17h:28m:0s

78:a5:04:58:65:9a  LS-BT1     OAD B 1.1-4   0x0003  IAH     100      -79   1000    2176    55E67D09-BED6-49D8-86D5-50E0216C4952  1         269s         13d:6h:50m:0s

c4:be:84:1d:1f:6f  LS-BT1USB  OAD B 1.1-25  0x0003  LIA     USB      --    1000    2177    5152554E-F99B-4A3B-86D0-947070693A78  15        6s           17h:23m:0s

78:a5:04:58:5f:bb  LS-BT1     OAD B 1.1-4   0x0003  IAH     100      -74   1000    2179    55E67D09-BED6-49D8-86D5-50E0216C4952  2         421s         5d:13h:30m:0s

c4:be:84:1d:23:6a  LS-BT1USB  OAD B 1.1-25  0x0003  IAH     USB      -88   1000    2361    5152554E-F99B-4A3B-86D0-947070693A78  15        1s           17h:23m:30s

6c:ec:eb:3f:be:ae  LS-BT1     OAD B 1.1-4   0x0003  IAH     100      -83   1000    2180    55E67D09-BED6-49D8-86D5-50E0216C4952  3         381s         2d:7h:0m:0s

Total beacons:6

APB UI:[0/NO_UPGRADE_REQD]:65535(0xffff) blks:0/0 rep:0  total:0(0x0)

APB UI:upg_b_status-next:0x00/ooo:0x00/next2:0x00/upg_b:0x00/allrx:0x00/oooBlk:0x00/oooBlk:0x00/oooBlk:0x00

APB UI:upg_b_status_errs-inv_upg:0x00/inv_cmd:0x00/inv_op:0x00/buf_tl:0x00/good:0x00

APB UI:acks/ka-From APB:0x00/0x00 From app:0x00,0x00/0x00

APB UI Clock:Start:1969-12-31 20:00:00  End:1969-12-31 20:00:00  Current:2016-02-17 10:51:36 

Note: Battery level for LS-BT1USB devices is indicated as USB.

Note: Uptime is shown as Days hour:minute:second.

Note: Last Update is time in seconds since last heard update.

Status Flags:L:AP's local beacon; I:iBeacon; A: Aruba Beacon; H: Aruba HiPower Beacon

            :U:Image Upgrade Pending

 

 

Sorry, yes, missed a word.



"show ap debug ble-table | include L" will show you only the local BLE radio
inside the AP.

Hi All,
Short question to the experts ... we are currently faceing issues with the first produced AP 325 with a beacon firmware version 1.1-34

i upgrade our controller to 6.5.2 and tested if the beacon firmware 
will upgraded to 1.2-17 

Sadly this don`t work ... 

the problem is that with the old firmware the AP`s stop working after a while ... and i am now searching for a solution how could i fix this for the effected AP`s (not all are effected based on the production serial number CNC7H and below )

every hint is welcome 

Br

 

Stefan 
 

You should open a TAC case so that they can determine what is really wrong.  Based on their testing, they could figure out of you have a hardware or a configuration issue and take it from there...

Try this one :
(MASTER-CONTROLLER) #show ap debug ble-?
ble-config Show config for this AP's BLE daemon
ble-counters Show pkt counters for BLE devices seen by this AP
ble-log Show ble debug logs for an AP
ble-table Show stats for BLE devices seen by this AP
ble-update-status Show config update status for BLE devices seen by this AP

(MASTER-CONTROLLER) #show ap debug ble-table ap-name

BLE Device Table
----------------