Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP-93 unable to work on IAP mode

This thread has been viewed 2 times

  • 1.  AP-93 unable to work on IAP mode

    Posted Oct 02, 2012 08:28 AM

    Hi,

     

    We have recently bought a AP-93 Access Point and upgraded it with ArubaInstant_Orion_6.1.3.4-3.1.0.0_35320 firmware.


    The upgrade was successful but now unable to configure it.

     

    admin/admin doesn't work and the console show this message: "turn off mobility"

     

    Thanks for your help



  • 2.  RE: AP-93 unable to work on IAP mode

    EMPLOYEE
    Posted Oct 02, 2012 08:37 AM

    Did you try the reset button?

     



  • 3.  RE: AP-93 unable to work on IAP mode
    Best Answer

    Posted Oct 02, 2012 09:02 AM

    Please clarify if you purchased an AP-93 or an IAP-93.

     

    A regular AP-93 cannot be upgraded to become an IAP-93.

     

    If this is an IAP-93 can you explain your upgrade process?



  • 4.  RE: AP-93 unable to work on IAP mode

    Posted Oct 02, 2012 10:06 AM

     

    Oh OK! We have purchased an AP-93...

     

    Thanks for your reply



  • 5.  RE: AP-93 unable to work on IAP mode

    Posted May 13, 2014 03:07 AM

    Hi Same error am using IAP-105... any workaround? its not broadcasting default ssid recolor in both 2.4 & 5 led

     

    ip_time_handler: Got ip and packets on bond0 Started master election 6-0
    process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
    asap_send_elected_master: sent successfully
    i am a potential master now
    turn off mobility



  • 6.  RE: AP-93 unable to work on IAP mode

    Posted May 13, 2014 07:37 AM

    have you tried to use a cable?  

     

    set IP adres with console cable and connect with a ethernet cable to go to gui