Wireless Access

Reply
Occasional Contributor I

AP-93 unable to work on IAP mode

Hi,

 

We have recently bought a AP-93 Access Point and upgraded it with ArubaInstant_Orion_6.1.3.4-3.1.0.0_35320 firmware.


The upgrade was successful but now unable to configure it.

 

admin/admin doesn't work and the console show this message: "turn off mobility"

 

Thanks for your help

Guru Elite

Re: AP-93 unable to work on IAP mode

Did you try the reset button?

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Moderator

Re: AP-93 unable to work on IAP mode

Please clarify if you purchased an AP-93 or an IAP-93.

 

A regular AP-93 cannot be upgraded to become an IAP-93.

 

If this is an IAP-93 can you explain your upgrade process?

Occasional Contributor I

Re: AP-93 unable to work on IAP mode

 

Oh OK! We have purchased an AP-93...

 

Thanks for your reply

Occasional Contributor II

Re: AP-93 unable to work on IAP mode

Hi Same error am using IAP-105... any workaround? its not broadcasting default ssid recolor in both 2.4 & 5 led

 

ip_time_handler: Got ip and packets on bond0 Started master election 6-0
process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
asap_send_elected_master: sent successfully
i am a potential master now
turn off mobility

New Contributor

Re: AP-93 unable to work on IAP mode

have you tried to use a cable?  

 

set IP adres with console cable and connect with a ethernet cable to go to gui

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: