Wireless Access

Reply
Occasional Contributor II

AP 93H problem

ARUBA AP 93H ,when I reset AP display this

 

APBoot 1.2.7.4 (build 32721)

Built: 2012-03-08 at 11:34:00

 

Model: AP-9x

CPU:   AR7242 revision: 1

Clock: 390 MHz, DDR rate: 390 MHz, Bus clock: 195 MHz

DRAM:  64 MB

POST1: mem 0 (Mismatch at a0200d34: Expected f5755861 got afbe0048) FAILED!

Copy:  done

Flash: 16 MB

PCI:   scanning bus 0 ...

       dev fn venID devID class  rev    MBAR0    MBAR1    MBAR2    MBAR3

       00  00  168c  002a 00002   01 10000004 00000000 00000000 00000000

Net:   eth0

Radio: ar9280#0

Occasional Contributor II

Re: AP 93H problem

I think maybe the mem is faild ,can i do anything,to make it ok

Re: AP 93H problem

So the AP is not booting up completely?

If the AP does not boot completely then the only thing you can do is trying to clear os

if clear os does not sove it and you keep getting that error then there is not too much you can do... just do a RMA...

 

When an ap does not boot

I actually just do clear os and if that does not fix it i open a case for a RMA.   Also put where is it hanging... and Aruba support always accept my RMAs rquests

 

Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Occasional Contributor II

Re: AP 93H problem

thank you

I clear the os ,but AP also cant boot.

 Image is signed; verifying checksum... failed! 0xa6f0325a    
 
can i refresh the os

Re: AP 93H problem

For issue like this, please open a TAC case.  

 

Thank you

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos

Re: AP 93H problem

If image is failing and you already did clear os just open a support case and ask for a RMA

Told them i already did clear os but im still getting that

They will grant it... becasue there isnt too much you can do with the AP, remenber the ap is a thin ap  is not complicated it works or it does not work... haha in this case is not working so you need a replacement... and also there arent too manyt things you can do

 

Cheers

Carlos

----------------------------------------------------
Product Manager - Aruba Networks
Alternetworks Corp
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: