Wireless Access

Reply
Occasional Contributor II

AP Clustering

Hello

 

I have two 3600 controller and more than 100 AP61 model APs in the building 

the following picture shows the network summary, I have a lot of interfering APS due to frequenceis I beleive and other problems 

my question here how to manage APs through Aruba GuI or CLI to get rid of intereference 

please advice me 

 

Thanks in advanced 

 

Regards

abyaby.JPG

Guru Elite

Re: AP Clustering

Interfering APs are access points that are not yours that your access points hear.  You cannot get rid of them, because they are not yours.  The Aruba system works around the interference created by those access points.  It is not necessarily a bad thing.

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Occasional Contributor II

Re: AP Clustering

Thanks for your reply 

I understand this part, can I manage the frequesncies/channels in Aruba or it is done automatically ?

 

Guru Elite

Re: AP Clustering

It is done automatically based on your regulatory domain.
******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: