Wireless Access

Reply
Frequent Contributor I

AP Neighbor Density information

Hi All

Was looking at the below two commands
#show ap load-balancing
#show ap arm state ap-name

 

Both appear to provide similar information however don't undertand what i am looking at - specifically with reegards to the last three columns, Neighbor Density, Relevant andNeigbors (R/T).

What does this represent/mean?

 #show ap arm state ap-name PAN-157

AP:PAN-157 MAC:24:de:c6:c9:88:20 Channel:6 EIRP:18 Max EIRP:19 Edge:disable
Client Density:0 Valid neighbors: 17 Relevant neighbors: 15 Rx Probe Reports: 116979
Moves(T/S):2303/117 Sticky(T/S):124/34 Bandsteer(T/S):2179/83 Loadbal(T/S):0/0
Neighbor Data
-------------
Name     IP Address      SNR (dB)  Path Loss (dB)  Channel/Pwr  Neighbor Density  Neighbors (R/T)  Relevant
----     ----------      --------  --------------  -----------  ----------------  ---------------  --------
PAN-209  10.150.140.218  20        94              6/18         0                  11/16
PAN-125  10.150.140.22   21        100             11/18        0                  20/20
PAN-156  10.150.140.63   25        87              6/18         0                  18/22           Yes
PAN-201  10.150.140.47   15        91              11/18        0                  22/23
PAN-208  10.150.140.183  29        84              1/18         0                  16/17           Yes
PAN-202  10.150.140.96   36        68              11/18        0                  22/22           Yes
PAN-158  10.150.140.51   20        90              1/18         0                  27/27
PAN-205  10.150.140.173  9         104             11/18        0                  26/26
PAN-203  10.150.140.101  10        102             6/18         0                  21/21
PAN-210  10.150.140.87   3         108             11/18        0                  18/21
PAN-155  10.150.140.160  10        103             1/18         0                  18/19
PAN-211  10.150.140.179  7         106             6/18         0                  29/29
PAN-124  10.150.140.116  14        99              1/18         0                  16/17
PAN-122  10.150.140.43   7         107             11/18        0                  11/14
PAN-160  10.150.140.42   8         105             1/18         0                  21/23
PAN-161  10.150.140.65   8         107             11/18        0                  23/23
PAN-159  10.150.140.249  12        101             1/18         0                  18/18
Legend: R = Relevant, T = Total,  Neighbor Density = (Overlap/Neighbor's Density/ Overlap to local density ratio/ Overlap to neighbor's density ratio)
Guru Elite

Re: AP Neighbor Density information

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: