Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP Rmmon failed to boot

This thread has been viewed 1 times

  • 1.  AP Rmmon failed to boot

    Posted Sep 27, 2013 04:49 AM

    Hi,

     

    I have a problem with access point. Please help.

     

    The password was unrecoverable so as we have reformatted it by using the break key during inital boot. So it enters this mode "ap:"...

    After that, I tired the steps of setting an IP adress, netmask, and so forth... and loaded the image from a tftp server. The image is successfully transferred to the AP. But then when it boots, it says "boot failed" and I am still in the "ap:" mode.

     

    Please any help here?



  • 2.  RE: AP Rmmon failed to boot

    EMPLOYEE
    Posted Sep 30, 2013 11:29 AM
    @joy1012 wrote:

    Hi,

     

    I have a problem with access point. Please help.

     

    The password was unrecoverable so as we have reformatted it by using the break key during inital boot. So it enters this mode "ap:"...

    After that, I tired the steps of setting an IP adress, netmask, and so forth... and loaded the image from a tftp server. The image is successfully transferred to the AP. But then when it boots, it says "boot failed" and I am still in the "ap:" mode.

     

    Please any help here?

    Is this a Campus AP or IAP?

    What version of code is this?

    What AP type is this?