08-14-2012 06:35 AM
Hello every one,
I have a 3200 with some AP-105 (which are all running in bridge mode).
My problem is that when the AP(s) loose connection to the 3200 - they stop working after 30 sec (way less than the time it takes for the 3200 to reboot).
Is there a way to increase this timeour (or disable it) ?
Solved! Go to Solution.
08-14-2012 08:00 AM
08-14-2012 11:07 AM
Would that just be one of my AP's ?
I've just tried to provision it into a RAP but it seems to be staying down (at least from the Mobility controller view point).
Is the purpose of this to turn one of the AP's into a kind of a local controller ?
Thanks for the help
08-15-2012 03:59 AM
So. I tried to convert one of my AP's into a RAP unit. Seems to work just fine when the 3200 is reachable, BUT ....
If I reboot the 3200 (or lose connection to it from the RAP) - then it still stopps to process the traffic (however it does seems like it holds out a bit longer - seems to be somewhere around 90 sec).
Is there a way to increase this threshold so my wifi clients doesn get their traffic dropped if I reboot the 3200 ?