Wireless Access

Reply
Frequent Contributor II
Posts: 109
Registered: ‎01-01-2012

AP on trunk with static IP and WIPS rogue detection

 

Hi,

 

I want to do L3 rogue AP detection. There are no AMs. So how to achieve this. 

 

1. By connecting AP on trunk port ---- but What IP this AP will get? from Native vlan DHCP ? and what if there is no DHCP in native            vlan and DHCP present in other VLANs?

    Can we assign a static IP of other VLAN ( not native vlan ) for the AP ???

2. Using this command on controller ----

       wms general learn-system-wired-macs enable

 

Thanks,

Guru Elite
Posts: 21,287
Registered: ‎03-29-2007

Re: AP on trunk with static IP and WIPS rogue detection


newbie wrote:

 

Hi,

 

I want to do L3 rogue AP detection. There are no AMs. So how to achieve this. 

 

1. By connecting AP on trunk port ---- but What IP this AP will get? from Native vlan DHCP ? and what if there is no DHCP in native            vlan and DHCP present in other VLANs?

    Can we assign a static IP of other VLAN ( not native vlan ) for the AP ???

2. Using this command on controller ----

       wms general learn-system-wired-macs enable

 

Thanks,


1.  Ap will get IP from native VLAN.  You cannot assign a static IP of a non-native VLAN to an AP

 

2.  Yes.  Please see the thread here:  http://community.arubanetworks.com/t5/Wireless-IPS-and-Content/L3-rogue-detection/m-p/28440/highlight/true#M28



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Frequent Contributor II
Posts: 109
Registered: ‎01-01-2012

Re: AP on trunk with static IP and WIPS rogue detection

Thanks Colin,

Thanks for your help.

I have read that thread...just had some doubts and wanted to confirm....I will try that command on controller.

 

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: