02-08-2015 09:31 PM
Hi , We have new controller, and a few 205 AP, yesterday I could provision the AP, but today when I connect the AP to the network, the controller is hard to detect the AP, then I factory reset the AP, and the AP can be detected, but when I try to provision the AP , the error comes out " cannot reprovision AP with old image until upgrades" . The controller software ver 6.4.1, Apboot ver is 126.96.36.199,AP image checksum passed. The controller configuration was copied from old controller .
Pls advise what's the cause? do I need to upgrade the AP image version?
thanks in advance