Hi Forum,
I have a master-master and a local-local in my lab. Vlan 501 is a vlan that exist in the locals and the switch that connects the APs to get a dhcp address on that vlan.
My APs power up and get an IP address and the do discover the local (see attached). The controller isn’t seeing the APs thought. I have enough licensing on the controllers, and they can ping the APs as the APs can ping the controllers but show ap active and show ap database shows me nothing(attached).
So,
- DHCP is working fine
- Ping between APs and controller is working
- Licenses are there.
- Vlans exists where needed
- Did adp discovery enable on the controllers but nothing changed.
Any ideas what is missing? It usually works but this time it isn’t.
Any help is greatly appreciated.