Wireless Access

Reply
Contributor I

AP wave output became weak suddenly

 Hi

 

The customer uses AP93. They informed one day they were difficult to connect wireless network. They found out AP wave output was weak as a result of measuring NetStumbler. It was fixed after AP93 reboot. What can you think about the reason AP's wave output became weak suddenly?

 

3600

5.0.3.3

ARM enable

 

Best Regards

Simon

Guru Elite

Re: AP wave output became weak suddenly

You need to be able to see what the transmit power of the AP is before it reboots, as a starting point, period.

 

Anything beyond that is spectulation.

 

 

******************
Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.
******************
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: