02-02-2012 01:50 PM
I have 2 new AP105's on a 3200 Controller. Running OS 126.96.36.199
All lights on the AP are green but clients never get a "N" connection. The best they can do is 54Mbps. I can take the same laptop I'm using to test to a different location with AP105's running of a a 650 Controller and N connection are fine. The 3200 is the Master Controller. The AP's lan connection is 1Gbps. I've checked the RF Management area and ensured that "High Throughput" is enabled as I've seen mentioned in a previous post.
Any ideas are appreciated.
Solved! Go to Solution.
02-02-2012 03:31 PM - edited 02-02-2012 03:34 PM
ensure that high throughput is enabled in the 802.11a and 8011 g radio profiles. Also make sure that the high throughput is enabled in the ht ssid profile under the SSID profile.
rf dot11a-radio-profile "AP"
rf dot11g-radio-profile "AP"
wlan ht-ssid-profile "default"